Measuring instructions: Pleated blinds [screwed, glued, clamped]

Please select the mounting type first

Pleated fastening: Wide clamping feet

Feet screwed / glued into frame

Pleated blind fastening: clamp brackets for rental apartments

Beam clamped to frame [K1]

Pleated blinds: adhesive strips for rental apartments

Side panels glued to glass [A2]
BB24 How to measure pleated blind width correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind width correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind width correctly

  1. measuring tool
    The easiest way to measure the correct pleated width is with a tape measure (alternatively with a double meter).
  2. Measure pleated width
    Measure the distance A. (see illustration) as close as possible to the window pane.
  3. Calculate pleated width
    To ensure that the pleated blind has sufficient space between the window frame, subtract approximately 4mm from the resulting measurement and enter the result in the online shop under "Width".
BB24 How to measure pleated blind height correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind height correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind height correctly

  1. Measure pleat height
    Measure the distance B. in the middle of the inside of the window frame (C. in figure).
  2. Order pleated blinds
    Enter the measured pleated blind height in the "Height" field in the online shop.

Good to know

Minimum size inside of the window frame (C. in figure)

The inside of the window frame (C in the illustration) must be at least 18mm wide to install the BB24 pleated blind. For honeycomb pleated blinds, 23mm is optimal.

Large/high/wide windows

Measure the distances A and B at 2-3 points and then use the smallest measurement result obtained.

Window frames / rubber seals

Always measure the window frame and not the rubber seals.

How can you measure as accurately as possible?

First, measure a portion of the distance (e.g., from the left to the center) and mark the measured distance with a pencil. Then, measure the distance from the right to the mark and add the two measurements together. This will give you the most accurate total width.

What to do if the measurement was incorrect?

Pleated blind is too high: You can correct this by making the pleated cord a little shorter.
Pleated blind is not high enough: You can correct this by making the pleated cord a little longer.
Pleated blind is not wide enough: Unfortunately, it is not possible to widen a pleated blind.
Pleated blind is too wide: This can be corrected later. Please request a quote.

BB24 How to measure pleated blind width correctly: clamp mounting

BB24 How to measure pleated blind width correctly: clamp mounting

BB24 How to measure pleated blind width correctly

  1. measuring tool
    The easiest way to measure the correct pleated width is with a tape measure (alternatively with a double meter).
  2. Measure pleated width
    Measure the distance A. (see figure).
  3. Order pleated blinds
    Enter the measured pleated width in the "Width" field in the online shop.
BB24 Measure pleated blind height correctly: clamp mounting

BB24 Measure pleated blind height correctly: clamp mounting

BB24 How to measure pleated blind height correctly

  1. Measure pleat height
    Measure the distance B: Top edge of window frame to bottom edge of window frame.
  2. Order pleated blinds
    Enter the measured pleated blind height in the "Height" field in the online shop.

Good to know

What to do if the measurement was incorrect?

Pleated blind is too high: You can correct this by making the pleated cord a little shorter.
Pleated blind is not high enough: You can correct this by making the pleated cord a little longer.
Pleated blind is not wide enough: Unfortunately, it is not possible to widen a pleated blind.
Pleated blind is too wide: This can be corrected later. Please request a quote.

BB24 How to measure pleated blind width correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind width correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind width correctly

  1. measuring tool
    The easiest way to measure the correct pleated width is with a tape measure (alternatively with a double meter).
  2. Measure pleated width
    Measure the distance A. (see illustration) as close as possible to the window pane.
  3. Calculate pleated width
    To ensure that the pleated blind has sufficient space between the window frame, subtract approximately 4mm from the resulting measurement and enter the result in the online shop under "Width".
BB24 How to measure pleated blind height correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind height correctly (measuring instructions for pleated blinds/folding blinds)

BB24 How to measure pleated blind height correctly

  1. Measure pleat height
    Measure the distance B. in the middle of the inside of the window frame (C. in figure).
  2. Order pleated blinds
    Enter the measured pleated blind height in the "Height" field in the online shop.
  3. Calculate pleated blind height
    To ensure that the pleated blind has sufficient clearance between the window frame, subtract approximately 4mm from the resulting measurement and enter the result in the online shop under "Height".

Good to know

Minimum size inside of the window frame (C. in figure)

The inside of the window frame (C in the illustration) must be at least 18mm wide to install the BB24 pleated blind. For honeycomb pleated blinds, 23mm is optimal.

Large/high/wide windows

Measure the distances A and B at 2-3 points and then use the smallest measurement result obtained.

Window frames / rubber seals

Always measure the window frame and not the rubber seals.

How can you measure as accurately as possible?

First, measure a portion of the distance (e.g., from the left to the center) and mark the measured distance with a pencil. Then, measure the distance from the right to the mark and add the two measurements together. This will give you the most accurate total width.

What to do if the measurement was incorrect?

Pleated blind is too high: You can correct this by making the pleated cord a little shorter.
Pleated blind is not high enough: You can correct this by making the pleated cord a little longer.
Pleated blind is not wide enough: Unfortunately, it is not possible to widen a pleated blind.
Pleated blind is too wide: This can be corrected later. Please request a quote.

You need support?
Our customer service team is at your disposal at any time.
Our Curtain home service.

Share cart